High Viscosity Flocculant/Anionic Polyacrylamide for Mining Use
Product introduction
Polyacrylamide is a type of polyelectrolyte that has been widely used in water treatment industry because of its low dosage requirement, high efficiency, and pollution-free effects.
For paper making indusrty, PAM can be regarded as a retention aid, a sort of very-high-mass, water-soluble polymers that are added to cellulosic fiber slurries before the formation of paper in order to improve the efficiency with which fine particles, including cellulosic fines, are retained in the paper product. Optimization of retention aid performance can be a key to achieving efficient and environmentally responsible papermaking objectives.
| Item | Specification |
| Product Name | Polyacrylamide / Flocculant |
| Appearance | White crystal granular |
| CAS No. | 9003/5/8 |
| Molecular Weight (million)) | 5-15 |
| Dgree Of Hydrolysis | ≤6% |
| Purity | ≥90% |
| Remainder Monocase | ≤0.05% |
| Efficiency PH Scope | ≤1-8 |
| Packing | 25kg / bag, 1 ton / pallet |
| Odour | Odorless |
| Causticity | Non-corrosive |
| Thermal stability | Easy to Decompose when Temperature above 120° |
PAM Instruction for Use
1. Dissolution: Dissolve polyacrylamide in water to make a 0.5-5‰ solution. Do add polyacrylamide into water in a gradual and continuous way.
2. Blending: Don’t blend the solution to hard or too fast. Suggested rotational speed of blender: 60-200 rpm.
3. Container: Do dissolve polyacrylamide in containers made of enamel, aluminum or plastic. Do not use iron containers to dissolve or keep polyacrylamide, the effect of the solution will be affected due to degradation otherwise.
4. Industrial Waste Water Treatment:
Water sources of many tap water factories come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times.
FAQ
Q1.Where is your factory located?
Our factory is in shandong, China. Located in an independent chemical park.
Q2.Can you give me a better price?
We value the cooperation with each customer and will provide you with the most favorable price.
Q3. How can you guarantee your quality?
Our production adopts fully automated production control to ensure the continuity of production and the stability of quality.
We have a strict production quality management system. Strict quality control is implemented on the raw materials, semi-finished products, finished products and products leaving the factory.
Quality first has always been the basic principle of our company. We also support customers to obtain samples for testing.
Q4.When is the delivery time?
Our production capacity: Xanthate: 50,000t/a; Dithiophosphate: 20,000t/a; Frother: 10,000t/a
For conventional products, we will keep inventory to ensure timely delivery within the time required by customers.
Q5:Which type of shipping would be better?
In consideration of the requirements of the customers in different rigions, we make deliveries by sea, air, train, truck, etc.
Q6:What's the convenient way to pay?
Bank T/T, Paypal be accepted. If you have a better idea, welcome to share with us.
Q7: Can I get a sample?
Yes, you are welcome to get samples for testing.
Product Tags:
|
|
High Viscosity Anionic Polyacrylamide Flocculant For Mining Use Images
|
